Magic Chef MCSPG30SL handleiding
Handleiding
Je bekijkt pagina 22 van 41
To light the top burners, push and turn the appropriate
control knob counter clockwise to the “Hi”or “Med” or
“Lo” position. You will hear a clicking noise – the sound
of the electric spark igniting the burner. Once burner
ignition has been achieved, then turn the burner control
knob to adjust the desired heat setting.
COOKTOP SAFETY GUIDELINES
Keep handles out of the way. Turn handles so that they don’t extend over the edge of the range or on a
burner that is on.
Take care when deep-frying. Oil or fat can overheat very quickly, particularly on a high setting.
Make sure that all burner parts are properly in place. Incorrectly or incompletely assembled burners may
produce dangerous flames. See ‘Replacing the burner parts’ in ‘Care and cleaning’.
Keep the burners clean, especially after a spill or boil over, make sure you clean the affected burners
before using them again. Food residue may clog the ignite and the notches of the flame spreader, stopping
the burner from functioning correctly. See “Care and cleaning” for instructions.
Check that the burner flames. They should be blue with no yellow tipping, and burn without fluttering all
around the burner cap. If not, see ‘Troubleshooting’ for advice.
Surface Burner Ignition
22
Bekijk gratis de handleiding van Magic Chef MCSPG30SL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Magic Chef |
| Model | MCSPG30SL |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5298 MB |
