Magewell Pro Convert SDI 4K Plus handleiding

Niet gecategoriseerd

Magewell

79 pagina's

PDF beschikbaar

Handleiding

Checking the Current Working Status

Input shows the resolution and frame rate of the current input signal.

For more detail about the input, go to the Signal tab.

■

Output shows whether an output device is connected to the Pro Convert

device.

NOTE: This parameter is not available for TX models.

■

PTZ Control shows the current protocol configured for the converter to

communicate with a PTZ camera in the PTZ tab.

■

CPU shows the current CPU usage (the load on the processor, shown as a

percentage) of the Pro Convert device.

CPU usage increases when the device is handling more complex video

processing tasks (e.g. encoding at higher resolutions and frame rates).

■

Memory shows current memory usage.

You can find out the free memory in System > Report tab, subject to

administrative rights.

■

Core Temperature shows the current temperature of the unit's processor.

Keeping the device free from dust and avoiding a high-temperature work

environment may help to avoid overheating of the device. If the core

temperature is approaching 100℃, please try to lower the temperature by

ensuring a supply of cooler air.

■

Board Index shows the rotary switch number.

You can change the number on the rotary switch to set a different Board

Index, which can be used in the generation of the NDI source name.

■

Up Time shows the elapsed time since your device’s last boot-up.

■

SD Card shows the capacity of current inserted SD card.

■

Bekijk gratis de handleiding van Magewell Pro Convert SDI 4K Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.