Magewell Pro Convert HDMI TX handleiding
Handleiding
Je bekijkt pagina 37 van 67
Setting Failover
Failover is a method of protecting your NDI transmission from failure. If the
source video fails, the backup device begins to provide a service. The initial
source will be restored after it recovers. This function is disabled by default.
Figure1. Set Receiver Control parameters in the Web UI
Setting Receiver Control
Source name shows the backup NDI channel name.
Click Change... and select the failover (backup) video device within the same
NDI group as the initial source.
■
IP Address shows the IP Address of the backup NDI channel.
The failover IP Address is automatically obtained after you select the backup
NDI source.
■
PTZ control
This function is disabled by default. Turn it on when you want to control a
connected PTZ camera through the NDI Studio Monitor, then the PTZ
controller interface will be shown in the NDI Studio Monitor.
■
Web control
This function is enabled by default. We recommend you keep it turned on,
because you cannot open the Web UI by clicking the gear icon in the NDI
Studio Monitor if this function is disabled.
■
37
Bekijk gratis de handleiding van Magewell Pro Convert HDMI TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Magewell |
| Model | Pro Convert HDMI TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13208 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 60.2 mm |
| Diepte | 100.9 mm |
| Hoogte | 23.3 mm |
| LED-indicatoren | Ja |
