Magewell Pro Convert HDMI TX handleiding

Niet gecategoriseerd

Magewell

67 pagina's

PDF beschikbaar

Handleiding

Figure1. Set Source Video parameters in the Web UI

Figure2. Monitor Pro Convert devices using NDI Studio Monitor

Setting Source Video

NDI

NDI is a standard developed by NewTek to transport IP video over a LAN with high-quality and low latency. Click and enter the NDI tab to configure NDI settings

and the Failover function. Note that you need to click Apply at the bottom-right corner of the page to save any changes.

® ® ®

Group name shows the group that receives NDI streams sent by your

converter.

■

The group name is non case-sensitive, and should contain A to Z, a to z,

0 to 9 and special characters like _-. The group name entry can contain

comma-separated values, allowing your converter to send to all the

groups listed here.

■

The default group is public group.

■

To make a private NDI group, refer to Creating a Private Group.

■

Source name shows the NDI source name used for your converter.

■

By default, the source name is #%board-id% (%serial-no%). when you

monitor Pro Convert devices using NDI Studio Monitor, the NDI stream

name is displayed as on the left in Figure2.

■

You can change the board-id via the rotary switch on your unit.

■

serial-no indicates the unit's serial number, as per the barcode label.

■

%board-id% and %serial-no% are the only supported variables.

■

You can change the Source Name to a string with maximum of 30

characters, containing A to Z, a to z, 0 to 9, spaces and special

characters like _-#()%.

■

If no text is entered for the Source Name, it will take the default value

■

Bekijk gratis de handleiding van Magewell Pro Convert HDMI TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.