Magewell Pro Convert HDMI TX handleiding

Niet gecategoriseerd

Magewell

67 pagina's

PDF beschikbaar

Handleiding

Setting SmartEDID

NOTE: This function is available for Pro Convert HDMI Plus/4K Plus products.

EDID

Click and enter the EDID tab to check the EDID information. By clicking Reset to Default in the bottom right corner of the page, you can cancel your settings.

This tab is only available for HDMI products.

SmartEDID

■

SmartEDID is enabled by default. When it is disabled, other related

functions can not be set.

■

Depending on the input capability of the converter and that of the

device connected to the loop-through interface, the converter will

smartly select to send the EDID to the video source device, to ensure

both the converter and the loop-through device can obtain the signal

they support.

■

Keep last

■

Keep the last EDID value used.

■

Keep the same EDID setting as the last time. This function is disabled by

default. To enable it, the SmartEDID function should also be enabled.

When Keep Last is enabled and the loop-through device is

disconnected, the current EDID will still be used. The converter will

continue receiving signal so the video capture and encoding continues.

Otherwise, the converter will resend its EDID to the source device for it

to redetermine what format of signal to send. As a result, there could be

an interruption to the source signal for a short time.

■

Add audio

■

Bekijk gratis de handleiding van Magewell Pro Convert HDMI TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.