Magewell Pro Convert HDMI Plus handleiding

Niet gecategoriseerd

Magewell

79 pagina's

PDF beschikbaar

Handleiding

Solution 2: using Ethernet over USB

RNDIS (For Microsoft)/ECM (For Mac/Linux) provides a virtual Ethernet link to

the computer's operating system.

The pop-up web UI of the connected device will be shown in your

browser.

Please do not change it unless there is a conflict in your network.

Figure1. Select NDI stream in NDI Studio Monitor

Solution 3: using the NDI Studio Monitor

The unit will automatically obtain an IP address by default. If you

want to set up a fixed IP address for your device, see Setting

Network.

Connect the device and your computer using a USB cable as shown

on the left.

Step 1

Type the Ethernet over USB IP address in your web browser. The

default address is http://192.168.66.1.

Step 2

Do not connect more than one converter simultaneously to

the same system via Ethernet over USB.



Connect your converter via Ethernet and power it up as shown in

the Figure1. Connections in Solution 1.

Step 1

Download and install the free NDI Studio Monitor software on a

computer which is in the same LAN as the converter. The software

can be found on the NewTek official website at

www.newtek.com/ndi/tools.

Step 2

Launch the NDI Studio Monitor software on your computer.Step 3

Bekijk gratis de handleiding van Magewell Pro Convert HDMI Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.