Maestro MR-924 handleiding
Handleiding
Je bekijkt pagina 9 van 52
9
instruction regarding positioning and switch on.
To use the fan only function:
- Turn the control knob to“ ”. The fan will blow out air at room
temperature.
- If the fan does not operate, the ambient room temperature is
cooler than the built-in thermostat “OFF” level. Turn the thermostat
dial gradually clockwise and the fan will start blowing.
- As soon as the fan starts, the light in the front of the machine will
illuminate.
To use the machine for heating:
- Turn the control knob to “I” for low heat and “II” for full heat.
For maximum heat output use “II” with the thermostat turned fully
clockwise.
- Set the level of heat by turning the thermostat dial gradually
clockwise for the lowest heat and fully clockwise for maximum.
- The thermostat will turn the machine o when the selected room
heating is achieved, and when the temperature drops it will turn on
again automatically.
Regulating the thermostat
When the room has reached the required temperature turn the
thermostat knob in an anti-clockwise direction up to the point where
the appliance switches o and not beyond. The temperature xed in
this way will be automatically regulated and kept at a constant level
by the thermostat.
- Switching o: turn the knob to setting ‘O’ disconnect from the
mains. Allow unit to cool down 5-10 minutes before storage.
Cleaning and maintenance
ATTENTION!
- Never clean appliance connected to the mains.
- Before cleaning, disconnect the heater and let it cool down.
EN
Bekijk gratis de handleiding van Maestro MR-924, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maestro |
| Model | MR-924 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3007 MB |
