Mac Tools JSA2200AJ handleiding
Handleiding
Je bekijkt pagina 5 van 18
JSA2200AJ 5 5/1316
INSPECTION
Visual inspection should be made before each use of the jack, checking for leaking hydraulic fluid and damaged, loose or missing parts. Each jack must be
inspected by a manufacturer’s repair facility immediately if subjected to an abnormal load or shock. Any jack which appears to be damaged in any way, is found
to be badly worn, or operates abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made by a manufacturer’s authorized repair facility.
It is recommended that an annual inspection of the jack be made by a manufacturer’s authorized repair facility and that any defective parts, decals or warning
labels be replaced with manufacturer’s specified parts. A list of authorized repair facilities is available from the manufacturer.
Failure to follow these Inspection instructions may result in serious injury or death, and/or property damage.
WARNING
TROUBLESHOOTING
PROBLEM ACTION
1. Unit will not lift rated load. Purge air from hydraulic system by following procedure under SETUP.
2. Unit will not sustain rated load or feels “spongy” under rated load. Purge air from hydraulic system as above.
3. Unit will not lift to full height. Purge air from hydraulic system as above.
4. Unit still does not operate. Contact your Mac Tools Distributor.
JSA2200AJ
22-TON CAPACITY
AIR/HYDRAULIC TRUCK JACK
Bekijk gratis de handleiding van Mac Tools JSA2200AJ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mac Tools |
| Model | JSA2200AJ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2787 MB |
