Luxman PD-191A handleiding
Handleiding
Je bekijkt pagina 25 van 28
BELT DRIVE ANALOG PLAYER PD-191A
23
Problem Cause Solution Ref. page
Hum noise is generated. • The ground wire is not connect-
ed.
• Connect the ground wire of to the GND
terminal.
15 - 16
• Connection of the phono cable is
not correct.
• Connect the phono cable correctly. 8, 15 - 16
• The cartridge is not mounted se-
curely on the headshell.
• Mount the cartridge on the headshell
with screws and nuts securely.
11
Sound skip occurs, or noise
(cracking sound) is induced.
• The stylus pressure is not adjust-
ed appropriately.
• Adjust the stylus pressure gauge in ac-
cordance with your cartridge.
12
• A scratch, a warp, or a stain is
present on the record. The record
is electrostatically charged.
• Do not play a record with a scratch or a
warp on this unit.
Clean the record with a commercially
available cleaner.
• A stain is present on the stylus tip. • Remove the stain from the stylus tip.
• This unit is installed in a vibrating
place.
• Install this unit in a horizontal and stable
place to avoid sound skip caused by
external vibration.
This unit may not work normally when the unit is subject to external influence such as static electricity.
In such a case, the unit can work normally by unplugging the power cable once and plugging it again.
This unit does not work normally even after that, please contact your dealer.
Bekijk gratis de handleiding van Luxman PD-191A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Luxman |
| Model | PD-191A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2492 MB |
