Luxman PD-191A handleiding
Handleiding
Je bekijkt pagina 16 van 28
14
How to Assemble
13. Instructions on how to adjust the
mounting position of the cartridge
using our OVERHANG GAUGE
When installing a cartridge or a headshell, please use the in-
cluded overhang gauge to set the correct alignment. Adjust
the mounting position of the cartridge as follows to minimize
tracking errors.
1) Temporarily secure the cartridge onto the headshell to
be used.
* Tighten the mounting screws gently and temporarily,
so that you can fine-tune the cartridge position later.
Over-tightening will make it impossible to re-adjust the
alignment of the cartridge.
2) Mount the spindle (SPINDLE) hole of the overhang
gauge onto the spindle of the turntable and lay it on the
platter.
3) Rotate the overhang gauge on the turntable so that the
large arrow mark faces the center of the tonearm's rota-
tion axis.
4) Position the tonearm so that it is directly over the center
of the spindle.
5) Re-position the cartridge so that the needle position of
the model to be used and the stylus tip mark printed on
the overhang gauge match. ( PD-191A: 16 mm)
* When adjusting the position of the cartridge, align the
stylus tip with the center of the headshell and move
the cartridge along the headshell screw tracks until the
needle is in the correct position.
6) Be careful not to move the position of the cartridge as
you tighten the screws firmly to secure it in place.
1), 6)
2)
3)
5)
4)
Bekijk gratis de handleiding van Luxman PD-191A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Luxman |
| Model | PD-191A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2492 MB |
