Lutron Caseta DVRF-6L-WH handleiding
Handleiding
Je bekijkt pagina 2 van 30
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Caséta by Lutron Load Controls
369987l 2 2.24.23
Specifications
Regulatory Approvals
• cULus Listed
• NOM Certified
• FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
• Industry Canada Certified
• IFTEL Certified
• NEMA 410: PD (-5ANS, -6ANS, -5WS, -10NXD,
-5NE), DVRF (-6L, -5NS)
Power
Operating voltage:
• 120 V~ 50/60 Hz: PD (-3PCL, -6WCL, -10NXD,
-6ANS, -5ANS, -5NE, -FSQN), DVRF (-6L, -5NS, -AS)
• 120 / 277 V~ 50 / 60 Hz: -5WS-DV
Key Design Features
• Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
IEC 61000-4-2.
• Tested to withstand surge voltages without damage
or loss of operation, in accordance with IEEE
C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
• Load controls always operate locally and do not
require system control.
• Power failure memory: should power be interrupted,
the control will return to its previously set level prior
to the interruption when power is restored.
• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD,
DVRF-5NS, and DVRF-6L use conventional
3-way wiring.
• DVRF-6L and DVRF-5NS can also be wired with an
accessory switch, DVRF-AS.
• Uses Lutron Claro wallplates or designer-style
wallplates from other manufacturers. Wallplates are
sold separately.
• Lutron Claro wallplates snap on with no visible
means of attachment.
• Requires a 1-gang U.S. wallbox. 3
1
⁄2 in (89 mm)
depth recommended, 2
1
⁄4 in (57 mm) depth
minimum
1
.
Key Design Features (continued)
• PD- models use green status LED(s) to indicate
load status.
• DVRF-6L uses a white soft glow light bar and the
DVRF-5NS uses a white status LED to indicate
load status.
• PD-FSQN provides 4 quiet fan speeds plus OFF for a
single ceiling fan.
System Communications and Capacity
• Caséta switches, dimmers, and fan controls
communicate with Pico remote controls, Caséta
motion sensors, and the Lutron Smart Hub / Smart
Hub PRO through Radio Frequency (RF).
• The Caséta switches, dimmers, and fan controls
must be located within 60 ft (18 m) line-of-sight or
30 ft (9 m) through walls of a Lutron Smart Hub,
Smart Hub PRO, or Caséta Repeater.
• The Caséta switches, dimmers, and fan controls
must be located within 60 ft (18 m) line-of-sight or
30 ft (9 m) through walls of Pico remote controls
or Caséta motion sensors (with no Smart Hub
installed).
Device limits
• Pico remote controls and Caséta motion sensors:
up to 10devices (total) may be paired to each
Caséta switch/ dimmer (with no Smart Hub installed).
• Smart Hub or Smart Hub PRO system: up to 75total
wireless devices (Caséta dimmers / switches, Pico
remote controls, Caséta motion sensors, and
shades) are supported per system. Smart Hub or
Smart Hub PRO counts as one device. The Caséta
repeater counts as one device.
Environment
• Ambient operating temperature: 32°F to 104°F
(0°C to 40°C), 0% to 90% humidity,
non-condensing. Indoor use only.
• PD-5WS-DV, PD-5ANS, PD-6ANS, PD-10NXD,
DVRF-5NS, and DVRF-6L can be used with a
mechanical switch in 3-way applications.
1
PD-FSQN requires 2` in (63` mm) minimum depth.
2
Bekijk gratis de handleiding van Lutron Caseta DVRF-6L-WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lutron |
| Model | Caseta DVRF-6L-WH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3733 MB |
