LUPO SuperpanelPRO Dual Color 60 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283/ 83

Afdrukken

Je bekijkt pagina 77 van 83

78

LIGHT MODES

DMX OPERATION

BLUETOOTH

DMX OPERATION - Advanced Settings

1. Press the

2

push button to enter the main MENU.

2. Select CONTROL with the

2

knob and press the

2

push button to conrm selection.

3. Select DMX with the

2

knob and press the

2

push button to conrm selection.

4. Select the DMX channel, rotating the

1

knob to change DMX ADDRESS in ascending or descending order among 1

and 512. The number shown on the display

3

is the selected channel to communicate with the control desk.

5. See DMX PROTOCOL MANUAL for DMX channel specication.

CCT MODE: Warm and cold white control mode. It allows you to adjust colour temperature (CCT), green/magenta

compensation (GN) and light intensity. This is the default setting.

1. In MODE menu select EFFECT MODE.

2. Select the EFFECT to be activated with rotate the

2

button, conrm the selection by pressing the

2

push button.

3. Use the knob

2

to change the DIMMER and the knob

1

to adjust the effect setting values.

1. Press the

2

push button to enter the main MENU.

1. Select CONTROL with the

2

knob and press the

2

push button to conrm selection.

2. Select BLE with the

2

knob and press the

2

push button to conrm selection.

1. Press the

2

push button to enter the main MENU.

2. Navigate through the main MENU with the

2

knob until DEVICE SETTINGS and press the

2

push button to

conrm selection.

3. Rotate the

2

knob to select DMX ADVANCED, press the

2

push button to conrm selection.

4. Select one of the options among the DMX BIT, DMX SIGNAL LOSS, RDM ENABLE, STROBE ENABLE and INV CCT

press

2

push button to conrm the selection.

DMX BIT:

Resolution of the DMX control. 8bit 1 channel per function and 16 bit 2 channels per function.

1. Select the DMX BIT item by pressing the

2

push button.

2. Rotate the

2

knob to choose between 8bit / 16bit, press the

2

push button to conrm the selected setting. See

DMX PROTOCOL MANUAL.

DMX SIGNAL LOSS:

This feature allows to choose the device’s behaviour in case of a DMX signal loss.

MODE

CCT

RGBW

HSI

PRESET

CCT/HUE

5

CT 2800K to 10000K

-

HUE 0º to 100º

-

GN/SAT/COLOR

6

« »

1

« »

3

GN -1.00 to +1.00 -

Select function R/G/B/W/CT/GN Change values of the function

SAT 0 to 100% -

- Change Preset

INTENSITY

4

Light Intensity

from 0 to 100%

ATTENTION:

Rotating the

1

knob changes the CT value- Pressing

1

button

select GN value that can be changed by rotating the same

1

knob.

NOTE: The symbol - ! - on the display indicates that there is no DMX signal.

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283/ 83

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van LUPO (Verlichting)

Handleiding bekijken

LUPO DayledPRO 1000

Verlichting - handleiding

Handleiding bekijken

LUPO DayledPRO Dual Color 650

Verlichting - handleiding

Andere merken in Verlichting