LUPO SuperpanelPRO Dual Color 60 Handleiding (83 Pagina's)

Handleiding

77

• Max input current for daisy chain: 15 A

• Device for indoor use only.

• Protection standard IP20.

• Maximum ambient temperature: 45 °C.

• Make sure power supply plug is suitable to power required.

• As prescribed by international regulations, a safety cable must be used when the xture is suspended from

ceiling.

• To switch on the light push the on/off button.

Instructions

Parabolic

Reector

Tilt lock knob

Display

Locking knob

Locking mechanism

for bowens mount

Focus knob

(Flood/spot)

ON/OFF

DMX INPUT

(Male 5 PIN XLR)

DMX THROUGH

(Female 5 PIN XLR)

POWERCON IN

POWERCON OUT

(Max 15 A)

FUSE

(15 A)

Battery connector

(Male 4 PIN XLR)

Getting Started with the Movielight 300

- In current mode press the

2

push button to enter the main MENU.

- In the sub-menus press the

2

push button to conrm a selection.

- Rotate the

2

knob to navigate in the main MENU and sub-menus.

- Use the « INTENSITY »

2

knob to adjust the light intensity from 0 to 100%.

- Use the knob

1

to adjust the light mode parameters.

- Display

3

.

1. Press the

2

push button to enter the main MENU.

2. Select MODE by pressing the

2

push button.

3. Select the light mode among CCT with the

2

knob and press the

2

push button to conrm selection.

4. Select among CCT / HSI / RGBW / PRESET / EFFECT / SAVE PRESET with the

5

knob and press the

5

push button

to conrm selection

5. See LIGHT MODES.

CONTROL PANEL

MODE

ATTENTION:

The light intensity level is adjustable from 0 - 50% if the FAN is

OFF. The value on the display ashes.

1 2

3

INTENSITY knobCCT knob

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.