LUPO SuperpanelPRO Dual Color 60 handleiding

Verlichting

LUPO

83 pagina's

PDF beschikbaar

Handleiding

DMX OPERATION - Advanced Settings

1. Press the

push button to enter the main MENU.

2. Navigate through the main MENU with the

knob and press the

push button to conrm selection.

3. Rotate the

knob to select DMX ADVANCED, press the

push button to conrm selection.

4. Select one of the options among the DMX BIT, DMX SIGNAL LOSS and RDM ENABLE press

push button to

conrm the selection.

DMX BIT:

Resolution of the DMX control. 8bit 1 channel per function and 16 bit 2 channels per function.

1. Select the DMX BIT item by pressing the

push button.

2. Rotate the

knob to choose between 8bit / 16bit, press the

push button to conrm the selected setting. See

DMX PROTOCOL MANUAL.

DMX SIGNAL LOSS:

This feature allows to choose the device’s behaviour in case of a DMX signal loss.

1. Select the LOSS DMX SIGNAL item with the

push button

2. Rotate the

knob to select the device’s behaviour between BLACK OUT /SETTINGS LAST / SETTINGS 1min,

press the

push button to conrm the setting.

Black out: The device switches off.

Settings Last: The values of the last selected setting are maintained over time until the device is switched off.

Settings 1min: The values of the last selected settings is maintained for one minute and then the device switch

off.

RDM Enable: ON/OFF, enable/disable RDM Protocol

INV CCT: ON/FF: enable/disable reversal CCT console control

DMX Channel Protocol - 16 bit

MODE

CHANNELS

DMX CHANNEL POSITION DMX VALUE VALUE

CCT 6/8*

1. DIMMER - byte 1

3. COLOR TEMPERATURE - byte 1

2. DIMMER - byte 2

0 - 65535

0 ÷ 100 %

6500 - 2700

DMX Protocol

Introduction

The Actionpanel Full Color, the Superpanel 30 Full Color and the Superpanel 60 Full color can be used with 8 bit or 16

bit DMX control.

(See DMX OPERATION - advanced settings in the user’s manual).

When used in 8 bit mode the panels uses one channel for each function. DMX values for each channel are in

the range of 0 to 255. When used in 16 bit mode the panels uses two channels for each function. The increased

resolution offers a smooth dimming and a more accurate color adjustment. DMX values for the rst channel (byte 1)

are in the range of 256 to 65535 while for the second channel (byte 2) they are in the range of 0 to 255.

ATTENTION: The symbol - ! - on the display indicates that there is no DMX signal.

DMX Channel Protocol - 8 bit

MODE

CHANNELS

DMX CHANNEL POSITION DMX VALUE VALUE

CCT 2/3*

1. DIMMER 0 - 255 0 - 100 %

0 ÷ 5 Ø

2. COLOR TEMPERATURE 0 - 255 6500 - 2700

6 ÷ 255 1 ÷ 25 Hz

3. *STROBE CONTROL

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.