LUPO SuperpanelPRO Dual Color 60 handleiding

Verlichting

LUPO

83 pagina's

PDF beschikbaar

Handleiding

1. Press the

push button to enter the main MENU.

2. Navigate through the MENU rotating the

button, select DEVICE SETTINGS, press the

push button to conrm

the selection.

3. Navigate through the MENU rotating the

button, select GENERAL, press the

push button to conrm the

selection.

4. Navigate through the FAN POWER / DISPLAY / FREQUENCY / FILTER / LINEARIZATION / CCT LIMIT functions,

rotating the

button to select the desired function and press the

push button to conrm the selection.

5. Within each function select the option to be activated and rotate the

button.

Fan Power: Fan operation ON / OFF.

When the fan is OFF the light intensity be adjustable between 0 and 50%.

Display: Time during which the display backlight stays on. 30sec / 1min / ALWAYS ON.

Frequency: Dimmer frequency 18 KHz - 25 KHz

Filter: It is the speed response of the system (smooth factor).

FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED.

Linearization: Linearization is the compensation curve for the human eye's perception of the luminous

intensity emitted as a function of the required power. Required power = dimmer value on the display. LINEAR /

EXPONENTIAL / LOGARITHMIC.

Linear: No compensation, the intensity of the light is directly proportional to requested power.

Exponential: The light intensity increases from 0 to 100 exponentially.

Logarithmic: The light intensity increases from 0 to 100 logarithmically.

CCT Limit: CCT range 2800 - 6500 or 3200 - 5600

DEVICE SETTINGS

1. Press the « OK »

button to enter the main MENU.

2. Select RESET DEVICE rotating the

button, press the

push button to conrm the selection.

3. Select YES rotating the

button, press the

push button to conrm the selection.

4. The device ask for further conrmation, select YES by pressing the press the

push button.THE DEVICE

RETURNS TO FACTORY DEFAULT SETTINGS.

RESET DEVICE

DEVICE SETTINGS

FAN: ON

DISPLAY: 1 min

FILTER : Normal speed

LINEARIZATION: Linear

FREQUENCY: 18 KHz

CONTROL

Manual

MODE

CCT

DMX OPERATION

BIT: 8 BIT

DMX SIGNAL LOSS: Settings 1 MIN

RDM ENABLE: OFF

INV - CCT: OFF

FACTORY DEFAULT SETTING

USB PORT

Use USB port for rmware updates.

Update the Firmware

1. Copy the le on an USB Pendrive (FAT32 formatted) in the main root;

2. Switch off the equipment and insert the USB Pendrive;

3. Switch on the equipment;

4. Wait until display backlight stop ashing (it takes several minutes and display backligh must toggle for all time

long);

5. Switch off the equipment;

6. Extract the Pendrive and switch on the equipment: the rmware is updated.

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.