Lorex LHA4104 handleiding
Handleiding
Je bekijkt pagina 25 van 122
Using the DVR’s On-Screen Display
7
1. Channel: Select the channel of the PTZ camera you want to control.
2. Navigation Controls: Click the directional arrows to move the PTZ camera. Click
to be-
gin autopan (PTZ camera pans around automatically).
3. Start Cruise: Cycles between preset viewing points automatically.
NOTE
PTZ cruise must be enabled on the DVR. See 12.4.5 Configuring PTZ Cameras, page 77 for details.
4. OSD Menu: On supporting cameras, access advanced camera settings in the On-Screen Dis-
play (OSD) menu.
NOTE
You can reset OSD menu settings on supporting cameras by performing a default settings reset on the DVR.
See 12.6.2 Restoring Default Settings, page 89 for details.
5. Close PTZ Controls
6. Speed: Set the speed of the PTZ camera’s movement.
7. Zoom: Click –/+ to zoom in or out.
8. Focus: Click –/+ to adjust the focus.
9. Iris: Click –/+ to set the iris.
10. Preset: Click to access preset settings. For details on setting presets, see 7.5.1 Setting PTZ
Presets, page 21
7.5.1 Setting PTZ Presets
Access the PTZ control menu to set preset viewing points for the PTZ. This is helpful for saving
frequently-monitored areas for quick viewing. Once you have saved a few preset viewing points,
you can start a PTZ cruise to switch between preset points automatically by clicking
.
To set PTZ presets:
#LX400086; r. 7.0/51608/56211; en-US 21
Bekijk gratis de handleiding van Lorex LHA4104, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lorex |
| Model | LHA4104 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 45566 MB |
