Lorex LHA4104 handleiding
Handleiding
Je bekijkt pagina 12 van 122
Basic Setup4
1. VGA cable (not included) — supports up to 1080p output.
2. HDMI cable (included)
• 4–channel DVRs: Supports up to 1080p output.
• 8/16–channel DVRs: Supports up to 4K output (4K monitor/TV required).
4.5 STEP 5: Connect to power
Connect the included power adapter to the 12V port. Connect the end of the power adapter to a
wall socket or surge protector. The DVR will power on.
1. Connect the included power cord to the rear panel as shown above.
2. Flip the ON/OFF switch to the ON position to power up the DVR.
NOTE
At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments,
the system loads a live display view.
4.6 STEP 6: Upgrade firmware to latest version (if available)
If a firmware upgrade is available, you will be asked to install it once the DVR starts up. It is re-
quired to upgrade your system firmware and client software / mobile apps to the latest version to
enable remote connection to the system.
If a firmware upgrade is available:
#LX400086; r. 7.0/51608/56211; en-US 8
Bekijk gratis de handleiding van Lorex LHA4104, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lorex |
| Model | LHA4104 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 45566 MB |
