Lorex E863SB handleiding
Handleiding
Je bekijkt pagina 11 van 22
EN - Camera Installation
Warning! Ensure the mounting surface supports
3.45 lbs (1.56 kg), 3× the camera’s weight.
1. Use the mounting template to mark and
drill holes for screws and the camera’s
cable.
2. Insert anchors for surfaces like drywall,
wood, brick, masonry, or concrete.
3. Guide the camera’s cable through the
surface opening or cable notch.
4. Mount the camera stand to the surface
using the included screws.
5. Connect one end of the Ethernet cable
into the camera’s Ethernet connector and
the other end into the NVR’s PoE port.
6. Loosen the adjustment screw to position
the camera, then tighten it in place.
7. Important! Remove the vinyl lm from the
camera lens for a clear view.
E863SB
7
360°
90°
Bekijk gratis de handleiding van Lorex E863SB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lorex |
| Model | E863SB |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 1488 MB |
