Lorex D871A81B handleiding

126 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 22 van 126
Using the On-Screen Display
7
Use the system’s on–screen display to navigate menus and configure options and settings.
NOTE
To access the on-screen display, you must connect the included mouse and a monitor (not included) to the re-
corder. See 4 Basic System Setup, page 6 for full instructions.
7.1 Navigation Bar
The Navigation Bar along the bottom of the recorders Live View display allows you to access
the Main Menu and control basic functions of the recorder.
To show the Navigation Bar:
Hover the mouse pointer near the bottom of the Live View screen.
NOTE
You can also lock the Navigation Bar to have it displayed at all times. See below for details.
1. Main Menu: Select for quick access to main operational settings, such as playback, backup,
network. and shutdown. See 16 Using the Main Menu, page 59 for full instructions on using
the Main Menu.
2. Viewing Modes: Select how many channels are shown on screen during live viewing.
3. Previous / Next Channel(s): Display previous / next channel(s) in single or quad channel
viewing mode.
4. Sequence Mode: Start or stop Sequence Mode. In Sequence Mode, the system display will
automatically cycle through connected channels every few seconds.
5. Playback: Opens the Playback Menu. This allows you to search for video recordings saved
on the recorders hard drive. For details on using the Playback menu, see 9 Playback, page
22.
6. Information: Displays system information, such as model number, device ID, IP address,
etc.
7. Network: View and configure network options, including setting a dynamic or static IP ad-
dress. For full instructions on configuring network options, see 16.7.1 Selecting DHCP or
Static IP Address (TCP/IP), page 71.
8. Hard Drive Manager: Configure hard drive read/write options (see 16.9.6 Configuring
Hard Drive Type, page 82 for details) or format drives (see 16.9.5 Formatting the Hard
Drive, page 81 for details).
9. Updates: Check for available firmware updates requires an Internet connection.
10. Warning Light & Siren Deterrence Cameras Only: Click to activate warning lights
and sirens for all connected deterrence cameras. Click again to deactivate.
11. System Date & Time
12. Lock Navigation Bar: Choose to always show the Navigation Bar on screen (
) or hide
it until the mouse pointer is near the bottom of the screen (
).
7.2 Quick Menu
The Quick Menu gives you quick access to functions which can also be accessed using the Nav-
igation Bar.
To open the Quick Menu:
#LX400118; r. 2.0/57886/57886; en-US 14

Bekijk gratis de handleiding van Lorex D871A81B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLorex
ModelD871A81B
CategorieNiet gecategoriseerd
TaalNederlands
Grootte47030 MB