Lorex D871A81B handleiding
Handleiding
Je bekijkt pagina 15 van 126
Basic System Setup4
4.4 STEP 4: Connect monitor
Connect the recorder to a monitor using the included HDMI cable (supports up to 4K resolution).
OR
Connect the recorder to a monitor using a VGA cable (not included - supports up to 1080p
resolution).
CAUTION
The system will automatically match the resolution of the connected monitor the first time you use the recorder.
If you need to switch monitors, make sure you set the recorder to an output resolution supported by the new
monitor BEFORE switching. See 16.5.1 Setting the Recorder’s Output Resolution, page 63 for details.
4.5 STEP 5: Connect power
Use the included power adapter to connect the recorder to a nearby outlet. Turn the recorder on
using the power switch on the back panel.
4.6 STEP 6: Lorex Setup Wizard
When you first power up your recorder, the Lorex Setup Wizard will begin. The Wizard will
help you configure core system settings and set up your cameras. It is recommended to review 5
Camera Installation, page 10 before choosing a permanent mounting position for your cameras.
NOTE
For detailed mounting instructions for your particular camera model, refer to your camera’s documentation on
lorex.com.
#LX400118; r. 2.0/57886/57886; en-US 7
Bekijk gratis de handleiding van Lorex D871A81B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lorex |
| Model | D871A81B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47030 MB |
