Lofrans THETIS 5003 handleiding
Handleiding
Je bekijkt pagina 11 van 60
www.lofrans.com
11
5.1 Measurement reset
Press the (ON) key to activate controls and to switch on the display lighting. The display lighting switches off 30 seconds
after the last command given (adjustable default time – see “Light Time”).
Measurement reset can be performed in the Measurement menu by selecting “Yes” in the
Reset Measure row.
When any key is released (UP or DOWN) the corresponding action is stopped.
Press key (UP) to control the anchor ascending
Press key (DOWN) to cast anchor
V=11.6 Vdc
V=11.6 Vdc
5 USE
Measure
ResetMeasure No
Unit
sF
eet
Off
Exit
4.9 Check menu
Use the (DOWN) or (UP) key to move around the parameters
Software Version
Indicates the version of the software installed.
Operation Time
Indicates the time the instrument operates
Sensor Test
The purpose of this function is to check the state
of the sensor:
Every pulse coming from receiver is momentary
displayed to the screen
Select with
Conrm with
LCD Test
This function switches on all the display’s pixels
thus making it possible to perform a check on
them.
Select with
Conrm with
Exit
To return to the settings menu.
Conrm with
Sensor Test
Sensor Test
UK
Bekijk gratis de handleiding van Lofrans THETIS 5003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | THETIS 5003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7542 MB |
