Lofrans SX5 handleiding
Handleiding
Je bekijkt pagina 8 van 20
8
SX5
5 USE OF THE ANCHOR WINDLASS
During the use of the anchor windlass, do not change directly from one direction to the other but wait until the anchor windlass
stops before manipulating the control into the opposite direction.
By disengaging completely the clutch, the anchor will be lowered at high speed. Consequently, the fast passage of the
chain into the hood and bow roller could damage them. It is recommended always to check the speed.
Make sure the anchor windlass is not powered before carrying out manual interventions.
5.1 Lowering the anchor
Lowering of the anchor can be carried out through the electric control or by gravity:
5.1.1 Lowering the anchor electrically
1. Make sure that the clutch is tightened and the brake is disengaged. Disengage all chain xing devices.
2. Activate the safety switch
3. Press the DOWN button from the control at your disposal. In this way, the lowering of the chain will be perfectly controllable and the
unwinding of the chain regular.
4. Once the chain is lowered, deactivate the safety switch.
5. Engage the chain xing devices.
5.1.2 Lowering the anchor by gravity
1. Make sure that the clutch is tightened and then disengage the chain stopper or safety stops. Disengage the brake.
2. Disengage the clutch gradually through the manoeuvre handle. Note: to adjust the descent speed of the chain act, through the
handle, on the clutch. By turning it clockwise, the braking speed of the chain will increase (until complete stop), while by turning it
anticlockwise, braking will be reduced.
3. Fix the chain (or the rope) to a strong point.
DOWN
LOCK
UNLOCK
Lofrans'
Bekijk gratis de handleiding van Lofrans SX5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | SX5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2846 MB |
