Lofrans SX3 handleiding
Handleiding
Je bekijkt pagina 10 van 22
10
SX3
5.3 Use of the warping drum
5.4 Notes for use
1. Make sure that the anchor is appropriately blocked.
2. Insert the manoeuvre handle into the drum and disengage the clutch by turning it clockwise. This operation will make the drum
independent of the gipsy.
3. Turn clockwise around the drum with three laps of rope.
4. By keeping the end of the rope, press the UP button and carry out the mooring manoeuvre.
5. Once the manoeuvre is ended, remove the rope from the drum and fasten it to a bollard.
6. Deactivate the safety switch.
1. By paying out the chain, it is necessary to manoeuvre so that the chain is laid down on the seabed without heaping on itself.
2. To ease the recovery and not overloading the capstan, steer up in a way that the boat slowly moves on the vertical of the anchor.
3. When the anchor is in the vicinity of the bow roller, slow down the recovery to check at best the insertion of the anchor into the seat.
The warping drum can be used regardless of the gipsy, to help the mooring manoeuvres.
During mooring, the load on the chain can be very high due to current, wind and waves.
Mooring, do not use the anchor windlass as strong point but always use a chain stopper.
If during recovery, the anchor windlass should block, slip or turn into self-protection mode, check the cause before proceeding.
Always remove the manoeuvre handle when not in use.
DOWN
UP
DOWN
UP
Lofrans'
Bekijk gratis de handleiding van Lofrans SX3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | SX3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3215 MB |
