Lofrans SX3.5 handleiding
Handleiding
Je bekijkt pagina 6 van 22

6
SX3.5
UP
Insert always an articulated joint between the chain and the anchor so that the chain itself does not turn into as spiral.
3.9 Chain insertion
In order to guarantee performances and reliability, it is recommended to use a calibrated chain of the measure corresponding to the
gipsy supplied.
4.1 Electrical cable section
In order to obtain the maximum performances from the anchor windlass and safeguard the electrical system, it is essential that the
anchor windlass be wired with cables of sufcient section as suggested in the table.
4.2 Contactor (Control Box)
Place it in a dry place near the capstan.
4.3 Circuit breakers
The circuit breakers recommended by Lofrans have an intervention curve and not a simple plate value. The switches selected for each
model guarantee the correct operation of the system.
4.4 Remote control electric panel board
The remote control electric panel board must be mounted in a comfortable position (such as the deck, the rudder or the cockpit), so that
the operator can see the capstan during the manoeuvre. Mount and seal the electric panel board so that the terminals remain in a dry
place.
1. Insert the chain into the hole and x to
a safe point.
2. Wrap the chain in the gipsy.
3. Recover all the chain by using the motor,
taking care that the chain enters into the
gipsy well aligned.
4 ELECTRICAL SYSTEM
Model
Motor Power
(W)
Voltage (V)
Contactor
(A)
Cable sizing according length of cable (positive + negative)
15-25 m 50-75 ft > 25 m > 75 ft
SX3.5
1700 24 70 25 mm
2
3 AWG 35 mm
2
2 AWG
2000 24 70 25 mm
2
3 AWG 35 mm
2
2 AWG
2300 24 125 50 mm
2
2 AWG 75 mm
2
000 AWG
2700 24 125 50 mm
2
2 AWG 75 mm
2
000 AWG
ATTENTION! Always disconnect electrical power to the anchor windlass before carrying out any operation.
1 2 3
Lofrans'
Bekijk gratis de handleiding van Lofrans SX3.5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Lofrans |
Model | SX3.5 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2893 MB |