Lofrans Remote Control handleiding
Handleiding
Je bekijkt pagina 10 van 16
10- EXAMPLES OF USE
BOW THRUSTER
PORT / STARBOARD
STERN THRUSTER
PORT / STARBOARD
BOW AND STERN
THRUSTER
STARBOARD /
STARBOARD
BOW AND STERN
THRUSTER
PORT / STARBOARD
WINDLASS
UP / DOWN
RETRACTABLE
THRUSTER
UP / DOWN
8- RESETTING
9- ADDING ADDITIONNAL TRANSMITTERS AND RECEIVERS
To reset a receiver, gently press the SYNC button using a small screwdriver
Æ The LED lights up.
Press the 4 up-down buttons simultaneously
Æ The LED will ash
The receiver’s memory has been cleared.
Turn the receiver’s power supply OFF, wait 5 seconds and then return to
step 2 (cf. Chapter 7 Set-up)
Transmitters: To add an extra transmitter, follow the instructions from step 2 (cf. Chapter 7 Set-up) and congure the
additional remote control.
NB: In case of error or doubt concerning the conguration, clear the receiver’s memory (cf. Chapter 8) and start from the
beginning. This will require the reconguration of all remote controls.
Each complete maximised system (ie. 2 receivers and all 8 channels used on the transmitter) can only include 2 transmitters.
Receiver : Go to step 2 (cf. Chapter 7 Set-up) and follow the instructions as normal.
*Receiver and transmitter are available as individual spare parts. Please contact Lofrans customer support at www.lofrans.com for any assistance.
10
LOFRANS'
Bekijk gratis de handleiding van Lofrans Remote Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | Remote Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2051 MB |
