Lofrans Mini Radio Remote Control handleiding

Niet gecategoriseerd

Lofrans

16 pagina's

PDF beschikbaar

Handleiding

Example 2

(g.2):

Four products with single commands

need to be operated through the

mini remote control. The logic of

the conguration is the same as in

the above example. The products

will operate when the button of the

mini remote is pressed. The voltage

supply for operating the load should

be connected at the

common terminal.

(g.2)

Example 3 (g.3):

Two products with inverse logic are

needed to be operated from the mini

remote control. The product should

always operate, and by the pressing

the appropriate button should

make the corresponding output

stop working. The voltage supply

for operating the load should be

connected at the common terminal.

(g.3)

10 - REPLACING THE BATTERIES

CAUTION: ENSURE THAT THE EQUIPMENT’S POWER SUPPLY IS

SWITCHED OFF BEFORE REPLACING THE BATTERIES IN ORDER TO

AVOID ACCIDENTAL ACTIVATION OF THE EQUIPMENT.

CAUTION: THERE IS A RISK OF EXPLOSION IF A BATTERY IS

REPLACED WITH AN INCORRECT TYPE. DISPOSE OF THE USED

BATTERIES ACCORDING TO THEIR INSTRUCTIONS.

1. Remove the silicon protection case from the transmitter.

2. Use a at screwdriver on the edge of the remote on the top and twist it in order

to remove the back part of the transmitter.

LOFRANS'

Bekijk gratis de handleiding van Lofrans Mini Radio Remote Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.