Handleiding
Je bekijkt pagina 22 van 84
www.livoo.fr
The hose should not be twisted or kinked when attached to the regulator and outdoor gas grill. No part of
the hose should touch any part of the appliance. So site the cylinder out to the left hand side of the
appliance at the maximum distant permitted by the hose length.
Use of the device
Tips
Never grill your food in flames.
Flames can be caused by residues of grease and dripping juice on the burners. To mimic flames, clean
the burners regularly, out of use and when the appliance is fully cooled.
The burners should ALWAYS be in the low position during cooking.
Protect your hands when cooking with protective gloves.
Do not use the appliance in strong winds. Do not use charcoal or lava stone.
Follow these instructions correctly to avoid serious injury or property damage and to preserve the device.
Carefully follow the assembly instructions of the device.
Connect the gas pipe to the plancha. Connect the regulator to the pipe. Connect the regulator to the
gas cylinder valve following the instructions provided with the regulator. Turn all control knobs to the off
position before opening the gas supply.
Lighting instructions: main burners
Connect the gas cylinder to the plancha following the instructions supplied with the regulator.
1. Turn all the control knobs to the ‘OFF’ position.
2. Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator connection and
operating instructions.
3. Push down and turn on the burner, at the same time, press on the red button of ignition, an audible
click will be heard and then the burners will be light.
4. If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before retrying
the ignition sequence. If the problem persists after turning the appliance back on, ask your gas
supplier, dealer, or gas technician for help. Never try to repair the problem yourself, it could lead to
serious bodily and/or material damage.
5. If the burner does not stay lit, repeat step 4.
6. When the burner has lit, the burner rate can be adjusted by turning the knob anticlockwise to any
position between the full and low rate positions.
7. To switch off the plancha, cut the gas inlet by turning the button of the valve or the regulator in
position "Stop", by following the instructions supplied with the regulator. Turn the buttons of all the
burners in the directions of watch hands, in position "Stop" switched off,(faded), when flames are
switched off.
Cleaning and maintenance
Rust spots may appear on the product due to the metallic particles contained in the stainless steel used
in the manufacture of this product. We recommend that you brush them off quickly to limit their spread.
After each firing, wait for the product to cool down completely.
Empty the grease trap and clean your appliance and utensils after each use to avoid a highly
flammable and toxic grease deposit on the cooking surfaces.
Do not use sharp objects or abrasive cleaners on the cooking surface. It is preferable to use a heavy-
duty degreaser. Do not leave standing water in the appliance; this can lead to rust and rapid
deterioration of the materials. Protect your appliance with a cover if you leave it outside in fine weather.
Protect from rain and moisture during extended periods of non-use.
Bekijk gratis de handleiding van Livoo DOC325, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livoo |
| Model | DOC325 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7221 MB |