Handleiding
Je bekijkt pagina 20 van 84
www.livoo.fr
Although this appliance has been manufactured to avoid sharp edges, care should be taken when
handling all parts to avoid the risk of injury.
Remove all protective packaging and keep it away from children. Read the safety instructions carefully
before you start using your plancha.
Refer to the parts list and assembly diagrams to assemble your plancha. Make sure that no parts or
pieces are missing or damaged/broken, which could impair the proper functioning of the appliance. The
guarantee for this appliance cannot be applied for abnormal conditions of use, incorrect storage
conditions, lack of maintenance, modification of the product, use for professional purposes, etc.
Ignition
Make sure that the appliance is positioned on a stable, flat surface.
Wear protective gloves and open the vents wide (if the model has them) so that the air can flow in and
accelerate the combustion.
CAUTION: This plancha will become very hot. Do not move it during use.
This product is intended for use with bottled gas only.
A regulator in accordance with EN16129: 2013 of 28-30 mbar must be used for butane gas or 37 mbar for
propane gas.
Never use an adjustable regulator with the product.
Make sure that the regulator is correctly set so that the supply pipe and valves are filled with gas.
Otherwise, the burners will not have enough power and will not light or will cut out regularly.
If you need to replace the gas cylinder, make sure that the appliance is switched off and that there is no
source of ignition nearby (spark, cigarette, open flame, etc.).
Make sure that the gas hose is not twisted, stretched, bent or kinked to allow free flow of gas.
• Use only spare parts supplied by your distributor. The failure to respect the modifications or the
replacements of spare parts would pull the cancellation of the guarantee.
• Never connect your appliance directly on your gas cylinder; use a regulator and a NF typical pipe.
• Never cover the device before it is not completely cooled.
• Use no spray near your device.
• Use no product of ignition while you light the device.
Assembly
THANKS TO CHECK JOINED ASSEMBLY DOCUMENT
Before use:
Make sure the hose has no nicks, cracks or signs of heavy wear. Make sure that the expiry date is not
exceeded.
Perform a leak test at the beginning of each season and each bottle replacement to ensure the proper
functioning of your device and its connections.
NEVER USE AN OPEN FLAME TO DETECT GAS LEAKS. DO NOT LIGHT THE UNIT DURING THE TEST.
Set all unit controls to off (OFF), Properly connect your gas cylinder, Open the gas cylinder valve.
To detect a leak, apply a solution of equal parts liquid soap and water to all connections in the gas
circuit (valves, hose, regulator and hex nut) with a brush.
Bekijk gratis de handleiding van Livoo DOC325, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livoo |
| Model | DOC325 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7221 MB |