Livn Ceramic 480 handleiding
Handleiding
Je bekijkt pagina 6 van 34
Wall Mounting
Note: Before drilling, make sure that there are no wires or pipes in the wall in order to prevent electric
shock or damage to plumbing.
1. Make sure the heat panel is not plugged into the wall socket.
2. Before mounting, determine where you want to attach the panel to the wall.
3. The wall should be firm, level and made of heat-resistant material.
4. Drill four holes with a diameter of 8 mm and a depth of 40 mm into the wall. The mounting
points of the heater are marked with a circle depending on the orientation.
CR500
CR500A = 494 mm
CR500B = 794 mm
5. Insert the plastic dowels into the drilled holes.
6. Use a screwdriver to turn the screws into the dowels & leave the head of the screw sticking out
of the hole.
7. Hang the heater on the screws. (Minimum distance from your wall for proper air circulation).
How to use your heater
Place the heater on a flat stable surface or mount it on the wall as previously described. Make sure
that the power switch is in the OFF position. Connect the heater. If the device is not used for a longer
period of time, switch it off using a power switch.
Bekijk gratis de handleiding van Livn Ceramic 480, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livn |
| Model | Ceramic 480 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6279 MB |
