Livn 350 Plus handleiding
Handleiding
Je bekijkt pagina 7 van 30
Malfunction
Examination
Approach
Does not start
Is the power supply plugged
in?
Plug in the power supply at the
correct voltage.
Are all the indicators not lit?
Press the button to select the
desired function.
Is there a power outage?
Device will be available once
power is restored.
Is the rear cover covered?
Install the rear case properly.
Airflow is much
weaker than before
Does the filter need to be
replaced?
Check if the filter is
approaching the end of its
service life and replace the
filter if necessary.
Odour from the air outlet
Does the filter need to be
replaced?
Air speed cannot
be changed automatically
Is it in manual
mode?
Select the correct operating
mode.
WI-FI GUIDE LIVN AIR PURIFIER 350 PLUS
Install the Livn app
1. Download the free Livn app from the Apple App Store or the Google Play Store, or scan
the QR code.
2. Create an account or log in. Enter a valid email address to receive the verification code.
Connecting the device to the app in Easy Mode (recommended)
1. Insert the Livn air purifier 350 Plus into the power socket and make sure that you have Wi-Fi
connection.
2. Open the app, log in and press the ‘Add device' button.
3. Select ‘Air Purifier (Wi-Fi)' and accept the location services if necessary.
4. Select the Wi-Fi network to which you are normally connected and enter your Wi-Fi password*.
5. Check if the Wi-Fi light on the device is flashing quickly (3x per second). If the light is flashing slowly,
press the on/off button for 3 seconds to change this.
6. Confirm in the app that the light is flashing quickly.
7. Click 'next’ to pair the Livn air purifier 350 Plus with the app.
8. After installation, click in the top-right to continue. Congratulations, your Livn air purifier 350 Plus
has now been successfully installed.
* Please note: You can only connect to the air purifier via a 2.4 GHz Wi-Fi connection.
Connecting the device to the app in App Mode
1. Insert the Livn air purifier 350 Plus into the power socket and make sure that you
have Wi-Fi connection.
2. Open the app, log in and press the ‘Add device' button.
3. Select ‘Air Purifier (Wi-Fi)' and accept the location services if necessary.
4. Select the Wi-Fi network to which you are normally connected and enter your
Wi-Fi password*.
5. Press 'EZ Mode' in the top-right corner and change it to 'AP Mode', see photo.
6. Check if the Wi-Fi light on the device is flashing slowly (1x per 2 seconds). If the light
is flashing quickly, press the on/off button for 3 seconds to change this.
Bekijk gratis de handleiding van Livn 350 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livn |
| Model | 350 Plus |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 5861 MB |
