Livarno Lux IAN 37695 handleiding
Handleiding
Je bekijkt pagina 7 van 31
7 GB/IE
General Safety Instructions / Bringing into use
Never throw batteries into fire or water. The
batteries may explode.
J Remove spent batteries from the product
immediately. Otherwise there is an increased
risk of leakage.
J Always replace all batteries at the same time
and only use batteries of the same type.
J Do not use different types of batteries or mix
used and new batteries together.
J Check regularly that the batteries are not leaking.
J Leaked or damaged batteries can cause chemical
burns if they come into contact with the skin; in
such cases you must wear suitable protective
gloves.
J Remove the batteries from the product if it is not
in use for any length of time.
J Make sure that the polarity is correct when you
insert the batteries. This is indicated in the battery
compartment. The batteries can otherwise explode.
J Remove used batteries from the device. Very old
or used batteries may leak. The chemical fluid
can damage the product.
Q
Bringing into use
Q
Inserting / replacing the batteries
Note: Remove the insulating strips before using the
product for the first time.
Note: Switch the product off before you insert or
remove the batteries.
j Turn the battery compartment cover
3
anticlock-
wise and take it off the battery compartment
2
(see Fig. A).
j Insert the (new) batteries into the battery
compartment
2
.
Note: Make sure you fit the batteries the right
way round (polarity). The correct polarity is
shown inside the battery compartment
2
.
j Put the battery compartment cover
3
back in
place on the battery compartment
2
and turn
it clockwise to tighten it (see Fig. B).
Q
Installing the light
j Pull off the protective film from the self-adhesive
pad
4
of the battery compartment cover
3
(see Fig. C).
j Attach the light in the desired location.
Note: The substrate should be dry, smooth and
free of dust and grease.
Note: For the first 24 hours after installation do
not remove the self-adhesive pad
4
. Otherwise
the self-adhesive pad
4
will lose its ability to stick.
Q
Switching On / Off
j Press the light in the middle to switch it on or off.
Bekijk gratis de handleiding van Livarno Lux IAN 37695, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 37695 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2065 MB |
