Livarno Lux IAN 293008 handleiding
Handleiding
Je bekijkt pagina 13 van 49
13 GB/IE
Item number: 54809
Operating voltage: 220–240 V∼ 50 / 60 Hz
Light bulb: LED filament light bulb, E27,
4 W
Max. rated power.: 40 W
Protection class: II /
Dimensions:
Metal base
diameter: 10 cm
Height (base): 7 cm
Glass diameter: 10 cm
Height (glass): 20 cm
Distributor:
Edi Light GmbH, Heiligkreuz 22, A-6136 Pill,
www.edi-light.com
Safety
Safety Notices
Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for property damage or personal
injury due to improper handling or failure to observe
the safety notices!
RISK OF AC-
CIDENT AND DANGER TO LIFE
FOR INFANTS AND CHILDREN!
This device may be used by children aged 8 years
and up, as well as by persons with reduced
physical, sensory or mental capacities, or those
lacking experience and / or knowledge, as
long as they are supervised or instructed in the
safe use of the device and they understand the
associated risks. Do not allow children to play
with the device. Cleaning and user maintenance
must not be performed by children without
supervision.
Do not leave the light or packaging material
lying unattended. Plastic film or bags, plastic
parts, etc. can turn into dangerous toys for
children.
Avoid the risk of fatal injury
from electric shock
We assume no liability for property damage or
personal injury due to improper handling or
failure to observe the safety notices!
Never use the light if any defects have been
identified.
Always check the lamp and the mains cable
with the plug for any damage before connect-
ing it to the mains.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Touch only the insulated part of the plug when
connecting to or disconnecting from the mains
supply!
To prevent hazards, if the external flexible lead
on this lamp is damaged it must be replaced
by the manufacturer, its service representative
or an equally qualified professional!
Before use, verify the available mains voltage
matches the voltage required for operating the
light (220–240 V
~
, 50 / 60 Hz).
Preventing fire and injury
hazards
CAUTION! RISK OF BURNS
DUE TO HOT SURFACES! Ensure
the light has been switched off and
has cooled down before touching it to avoid
burns. Lamps become very hot.
Check each bulb for damage immediately
after unpacking.
Replace defective bulbs with new ones immedi-
ately. Before replacing the bulb always remove
the mains plug from the socket.
Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
Bekijk gratis de handleiding van Livarno Lux IAN 293008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 293008 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4322 MB |
