Livarno Lux IAN 273026 handleiding

67 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 67
18 GB/IE
Initial use
Mounting the light
Remove the individual parts from the packag-
ing and assemble the solar light as shown in
Figure A. There are two options: the spacer
tube
3
will make the solar light approx.
42 cm (on IAN 273025); approx. 34 cm
(on IAN 273026); approx. 51 cm (on IAN
273027) tall (see Fig. B), the spacer tube
2
will make it approx. 29 cm (on IAN 273025);
approx. 24 cm (on IAN 273026); approx.
34 cm (on IAN 273027) tall (see Fig. C).
Insert the selected spacer tube
2
or
3
into
the designated opening on the solar module
5
(see Fig. A).
T
hen insert the ground stake
1
into the botto
m
of the spacer tube
2
or
3
(see Fig. A).
Installing the light
Note: The solar light can be installed without a
power source.
Only use the solar light with the included
ground stake
1
.
Push the assembled solar light far enough into
the ground (lawn, flower bed) so it is stable.
Since the light relies on sunlight, consider and
observe the following points prior to installat
ion.
1. Select a location where the solar module
5
is exposed to direct sunlight during the day.
2. Position the solar light so the solar module
5
is not covered or in the shade (trees, roof
ridge, etc.).
3. Be sure the solar module
5
is not impacted
by another light source, e.g. yard or street
lighting, as this will prevent the light from
switching on at dusk. Remember many light
sources will only switch on due to the time or
movement during the night.
Preparing the light
prior to initial use
Note: The solar light features a twilight sensor
and an On / Off switch
6
. When fully charged
the light on time is approx. 6 to 8 hours.
Unscrew the sphere
4
from the solar module
5
counter-clockwise. Set the On / Off switch
6
to the ON position before using it for the
first time.
Screw the sphere
4
clockwise all the way
into the solar module
5
and place the solar
light in the sun.

Bekijk gratis de handleiding van Livarno Lux IAN 273026, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLivarno Lux
ModelIAN 273026
CategorieVerlichting
TaalNederlands
Grootte4978 MB