Livarno Lux IAN 106764 handleiding
Handleiding
Je bekijkt pagina 26 van 29
26 GB
Guarantee and ServiceStart-up / Maintenance and Cleaning / Disposal / Guarantee and Service
Place the washer
6
and the nut
7
onto the
thread and tighten using the tool
8
.
Remove the protective film from the adhesive
pad
11
and apply the adhesive pad
11
to the
plastic plate
10
of the base. Push the plastic
plate
10
into the base
5
.
Turn the reflector
1
into the desired direction.
Plug the mains plug into a socket that has been
professionally installed.
Your light is now ready to use.
Model 7324-012L, 7325-012L and
7326-022L:
Screw the rods
3
clockwise into the base
5
.
Plug the mains plug into a socket that has been
professionally installed.
Your light is now ready to use.
Switching the lamp on / off
Switch the lamp on or off using the ON / OFF
switch
9
.
Adjusting the reflector
Note: Only change the position of the reflector
1
if the lamp is turned off.
Note: Retighten the locating screw
12
if the reflector
1
moves. You will need a fitting screwdriver to do this.
Allow the light to cool off completely.
Bring the lamp arm
13
into the desired position.
Angle the reflector
1
to your liking.
7323-018L:
Turn the rods
3
in the desired direction.
Angle the reflector
1
to your liking.
7326-022L:
If the reflector
1
moves, loosen the socket head
screw
15
with the tool.
Retighten the locating screw
12
and tighten the
socket head screw
15
again.
Bring the lamp arm
13
into the desired position.
Note: Angle the reflector
1
to your liking.
Maintenance and Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug from the socket.
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
CAUTION! RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with water
or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at your
local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the Europea
n
Union, the product has to be disposed of
in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Do not dispose of products bearing this symbol in
your normal household waste, but instead they must
be taken for recycling to a collection site for electric
al
and electronic appliances. Recycling helps to reduce
the consumption of raw materials and protects the
environment.
Guarantee and Service
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In
the event of a defect arising during the warranty pe-
riod, please send the appliance to the listed Service
Centre address, making reference to the following
Bekijk gratis de handleiding van Livarno Lux IAN 106764, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 106764 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2447 MB |
