Listo AM L4 handleiding
Handleiding
Je bekijkt pagina 15 van 33
28 29V.1.0 V.1.0
3. Empty the waste from the dust container into the dustbin and, if necessary, clean the
inside of the container with a soft and slightly damp cloth, then allow it to fully dry.
4. Clean the lter with a slightly damp cloth, a soft brush or a conventional vacuum
cleaner if it is very dirty.
5. Reassemble the ltration unit as shown in gure 8 below.
6. Put the dust container back on the motor unit until it "clicks" into place, as shown in
diagram 9, and put the appliance back on its charging base.
7. Clean the outer surfaces of the appliance with a soft, slightly damp cloth and dry
them completely.
Diagram 7
Diagram 8
Diagram 9
REPLACING THE FILTER
The vacuum cleaner lter is permanent. However, for optimal performance, after a long
period of use or if you are no longer able to clean it e ectively, the lter can be replaced.
Contact the after-sales service at your store.
1. Remove the dust container and ltration unit as explained in diagrams 5 and 6.
2. Unscrew the screws on the ltration unit as explained in diagram 10.
3. Remove the fabric lter and replace it with a new one.
4. Put back the screws, then the ltration unit in the dust container.
STORAGE
• The appliance must always be stored on its base.
• The attachments can be stored in the compartments
provided for this purpose on either side of the charging
base (see diagram 11).
• If the appliance is out of use for a long period, unplug the
mains adapter from the wall outlet.
Diagram 10
Diagram 11
Bekijk gratis de handleiding van Listo AM L4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Listo |
| Model | AM L4 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4751 MB |