Lionelo Willow XL handleiding
Handleiding
Je bekijkt pagina 5 van 40
‑ 5 ‑ EN
INSTALLATION INSTRUCTIONS
Follow the order of connecng elements during the assembly of the playpen.
1.
Place the lower connectors (g. 1) on a stable surface. Make sure the sucon
pads are poinng toward the oor.
2.
Unfold the cover with the boom facing down, and then insert the short and
long horizontal tubes into the sleeves of the boom of the cover.
3.
Connect the short and long horizontal tubes inserted into the sleeves of the
boom of the cover with the lower connectors (g. 2).
Note! Make sure that the metal tab has popped into its place inside the connector
(g. 6). Alternang the movement of the tube le and right can make it easier to
get it into the right place.
4.
Connect the 6 vercal tubes (g. 3) inserted into the side sleeves of the
cover with the lower connectors, and then install the upper connectors on
them (g. 4).
5.
Connecng the horizontal tubes of the upper part of the frame with the
upper connectors (g. 5), start from the places in the cover equipped with
a zipper (g. 7).
DISASSEMBLY INSTRUCTIONS
Disassembly of the playpen should begin with the zippered areas of the cover.
Unzip the cover, then remove the tubes from the connectors by pressing the
release buons, located on the lower and upper connectors (g. 6).
CLEANING
The cover can be washed at up to 30°C on delicate fabric programs, without
spinning.
The photos are for reference only, the actual look of the products may dier from the
ones shown in the pictures.
Bekijk gratis de handleiding van Lionelo Willow XL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lionelo |
| Model | Willow XL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3172 MB |
