Handleiding
Je bekijkt pagina 23 van 140
‑ 23 ‑ EN
Instrucons for use
Power supply
1. It is recommended to fully charge the monitor before use.
2. Connect the plug of the power cord to the monitor and the other
end to the power supply. Connect the power supply to the power
outlet (g. 1).
NOTE: Use only the power supply included in the set.
Device operaon
NOTE! The monitor and camera are paired by default. No re-pairing
is necessary.
1. Connect the plug of the power cord to the camera and the other
end to the power supply. Connect the power supply to the power
outlet (g. 2). The device will beep.
2. Press and hold the switch (11, g. C) for 3-5 seconds to turn the
monitor on. Aer about 10 seconds, the camera image will be
displayed on the monitor.
3.
Place the camera in a convenient locaon and point it in the
direcon you want to monitor.
NOTE
Do not place the camera or wires in the baby’s crib or within reach of the
baby (min. 1 meter distance) due to the risk of injuring or suocang the
baby. In the event of image or sound interference, place the devices in
a dierent locaon and make sure they are not near other electrical devices.
Adding a camera
It is possible to pair a total of 4 cameras.
1. Press the back buon (2, g. C) to enter the main menu.
2.
Select the “Cameras” opon, then select the channel to which the
new camera is to be added (g. 3a) and press the OK buon. The
camera was paired with the monitor (g. 3b).
3. If you have problems adding a camera, make sure the camera is
Bekijk gratis de handleiding van Lionelo Babyline 8.3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lionelo |
| Model | Babyline 8.3 |
| Categorie | Babyfoon |
| Taal | Nederlands |
| Grootte | 11585 MB |
