Handleiding
Je bekijkt pagina 11 van 160
‑ 11 ‑
EN
NOTE: Use only a 5V 1A power supply. The product can be powered by
a power bank device, for example.
Installing the camera on the wall
Choose a place with the widest possible viewing angle.
Drill two holes in the place where you want to install the device, and insert
the wall plugs and screws into them (g. 3). Aach the camera to the screws
by sliding them into the guides located at the boom of the camera.
Note! During installaon, pay aenon to the height and depth to which the
screws are screwed in.
Device operaon
NOTE! The monitor and camera are paired by default. There is no need to
pair them again.
1. Connect the plug of the power cord to the camera and the other end to
the power adapter. Plug the power adapter into a power outlet.
2.
Press and hold the switch for about 3 seconds to turn on the monitor. Aer
about 10 seconds, the camera image will be displayed on the monitor.
3.
Place the camera in a convenient locaon and point it in the direcon
you want to monitor.
NOTE
Do not place the camera or wires in the baby’s cot or within reach of the baby
(minimum 1 meter distance) due to the risk of injury or suocaon.
Placing the camera and monitor too close may cause sound interference. In
the event of image or sound interference, place the devices elsewhere and
make sure they are not near other electrical devices.
Bekijk gratis de handleiding van Lionelo Babyline 3.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lionelo |
| Model | Babyline 3.2 |
| Categorie | Babyfoon |
| Taal | Nederlands |
| Grootte | 12680 MB |
