Lincoln Electric Prism Wall Mount handleiding

Niet gecategoriseerd

Lincoln Electric

36 pagina's

PDF beschikbaar

Handleiding

E-2

TROUBLESHOOTING

Observe all Safety Guidelines detailed throughout this manual

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your

Lincoln Authorized Service Facility for technical troubleshooting assistance before you proceed.

WWW.LINCOLNELECTRIC.COM/LOCATOR

PROBLEM

(SYMPTOMS)

POSSIBLE AREAS OF

MISADJUSTMENT(S)

RECOMMENDED COURSE OF ACTION

Faulty Filter Maintenance

Indicator. Indicator does not

indicate saturation level of

pre-lter and/or LongLife

lter cartridge.

Blocked indicator tubes. Clean tubes with compressed air.

Indicator leaking. Replace Filter Maintenance Indicator.

Poor suction.

Prism Wall Mount (/HE) does

not function properly.

Outlet(s) blocked. Remove obstructions from the outlet opening(s) and/or

connected ductwork.

LongLife lter cartridge clogged (check lter

maintenance indicator - See Figure B.1).

Remove obstructions from the outlet opening(s) and/or

connected ductwork.

Pre-Filter clogged. Clean (See Periodic Maintenance) or replace (See Pre-

Filter) the pre-lter.

Dust or smoke coming out of

the outlet opening(s).

Pollution of the facility.

LongLife lter cartridge damaged. Replace LongLife lter cartridge (See LongLife Filter

Cartridge).

Sealing on LongLife lter cartridge damaged. Replace LongLife lter cartridge (See LongLife Filter

Cartridge).

Dust or smoke coming out of

the inlet connection(s).

Pollution of the facility.

Outlet(s) blocked. Remove obstructions from the outlet opening(s) and/or

connected ductwork.

LongLife lter cartridge clogged (check lter

maintenance indicator - See Figure B.1).

Replace LongLife lter cartridge (See LongLife Filter

Cartridge).

Pre-Filter clogged. Clean (See Periodic Maintenance) or replace (See Pre-

Filter) the pre-lter.

Non-return valve(s) installed incorrectly. Install non-return valve(s) correctly.

Dust or smoke coming out of

one arm (Dual Arm versions

only). Pollution of the facility.

Related non-return valve installed incorrectly. Install non-return valve correctly.

Related non-return valve damaged. Replace non-return valve.

Dust or smoke coming out of

bottom housing. Pollution of

the facility.

Cracks or holes in bottom housing. Replace bottom housing.

PRISM

WALL MOUNT

Bekijk gratis de handleiding van Lincoln Electric Prism Wall Mount, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.