Lincoln Electric Fume Extraction Arms handleiding

Niet gecategoriseerd

Lincoln Electric

50 pagina's

PDF beschikbaar

Handleiding

Observe all Safety Guidelines detailed throughout this manual

E-2

TROUBLESHOOTING

FUME EXTRACTION ARMS

PROBLEM

POSSIBLE CAUSE RECOMMENDED COURSE OF ACTION

EXTRACTION ARM CREAKS

OR SQUEAKS.

INSUFFICIENT LUBRICATION. LUBRICATE USING OIL OR GREASE.

EXTRACTION ARM NOT IN

BALANCE.

TOO MUCH OR NOT ENOUGH

FRICTION (AGEING).

ADJUST THE FRICTION USING THE UPPER BOLT ON THE MIDDLE HINGE

ADJUSTING MECHANISM NOT

STRONG ENOUGH.

ADJUST ADJUSTING MECHANISM.

EXTRACTION HOOD NOT IN

BALANCE.

TOO MUCH OR NOT ENOUGH

FRICTION (AGEING).

ADJUST THE FRICTION USING THE BOLT AND NUT ON THE PLASTIC PLUG.

EXTRACTION CAPACITY

INSUFFICIENT.

THROTTLE VALVE CLOSED. OPEN THE THROTTLE VALVE.

FLEXIBLE HOSE(S) TORN OR

LOOSE.

REPAIR OR REPLACE THE FLEXIBLE HOSE(S).

RUBBER ARM BAND SEAL TORN. REPAIR OR REPLACE THE RUBBER BAND SEAL(S).

If for any reason you do not understand the procedures or are unable to perform the maintenance or repairs safely, contact your

Lincoln Authorized Service Facility for technical troubleshooting assistance before you proceed.

WWW.LINCOLNELECTRIC.COM/LOCATOR

Bekijk gratis de handleiding van Lincoln Electric Fume Extraction Arms, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.