Liebherr XRCsdh 5265 Prime handleiding

66 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 66
Fig.82
u
Carry out action steps according to the illustration.
w
Demo mode is deactivated.
w
Appliance is switched off.
u
Switch on the appliance. (see 4.1 Switching on appliance
(first use))
w
Appliance is reset to factory settings.
Resetting to factory settings
Use this function to reset all settings to factory defaults.
All settings you have made so far are reset to their original
settings.
Performing a reset
Fig.83
Fig.84
u
Carry out action steps according to the illustration.
w
Device is reset.
w
Device is switched off.
u
Restart the device. (see 4.1 Switching on appliance (first
use))
7.3 Messages
There are two categories of messages:
Category Importance
Warning Warnings appear in the event of a door alarm or
malfunction.
Simple warnings can be cancelled by yourself.
In the event of serious malfunctions, you must
contact customer service. (see 10.4 Customer
Service)
Reminder Reminders remind you of general processes.
You can carry out these operations to end the
message.
7.3.1 Overview of warnings
Behaviour of the appliance in the event of warnings:
-
Warning appears in red on the display.
-
The alarm tone sounds at an ever-increasing volume.
-
The interior lighting pulsates for some warnings.
Message
Cause Exit the
message
Door alarm
The message
appears if the door is
open for too long.
Carry out
action steps
(see Door
alarm) .
Power outage
alarm
The message
appears if the
freezing temperature
has risen due to a
power failure.
Carry out
action steps
(see Power
outage alarm) .
Temperature alarm
The message
appears if the
freezing temperature
does not correspond
to the set tempera‐
ture.
Carry out
action steps
(see Tempera‐
ture alarm) .
Error
The message
appears if there is
an appliance error.
A component of
the appliance has a
fault.
Carry out
action steps
(see Error) .
7.3.2 Ending warnings
Door alarm
Fig. 85 Example illustration
u
Carry out action steps according to the illustration.
-or-
u
Close the door.
w
The display returns to the status indicator.
You can set how long the door may be open before the door
alarm sounds. (see Setting the door alarm)
Controls
* Depending on model and options 19

Bekijk gratis de handleiding van Liebherr XRCsdh 5265 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLiebherr
ModelXRCsdh 5265 Prime
CategorieKoelkast
TaalNederlands
Grootte10196 MB