Handleiding
Je bekijkt pagina 11 van 24
Fig. 15
u
Attach the handle on the opposite side. Fig. 15(1)
w
The screw holes must be exactly on top of each other.
u
Tighten screws with screwdriver T15. Fig. 15(2)
u
Place the covers on the side and push them on. Fig. 15(3)
w
Ensure that they latch into place.
4.11.5 Relocating the bearing components
Fig. 16
u
Carefully lift the cover plug at the bottom of the device
with a slotted screwdriver.
u
Pull out the cover plug. Fig. 16(1)
u
Insert the cover plug on the opposite side. Fig. 16(2)
Fig.17
u
Unscrew the bolt of the lower swap bearing block with an
Allen key AF5. Fig.17(1)
u
Insert the bolt on the opposite side. Fig.17(2)
u
Tighten the bolt with an Allen key AF5.
4.11.6 Relocating the upper bearing compo‐
nents
Fig. 18
u
Unscrew the upper bolt with an Allen key. Fig. 18(1)
u
Tighten the bolt on the opposite side with an Allen key.
Fig. 18(2)
4.11.7 Fitting the door
WARNING
Danger of injury due to door falling out!
If the bearing parts are not screwed on tightly enough, the
door may fall out. This can result in serious injuries. In
addition, the door may not close with the result that the
appliance does not cool properly.
u
Screw the bearing brackets on firmly with 4Nm.
u
Check all screws and retighten them if necessary.
Fig. 19
u
Slide the door onto the upper bolt in closed status. (see
Fig. 19)
Installation conditions
* Depending on model and options 11
Bekijk gratis de handleiding van Liebherr TG 14Ve04, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | TG 14Ve04 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 3586 MB |
