Handleiding
Je bekijkt pagina 9 van 36
3.3.1 Ending sleep mode
► Touch the display briefly with your finger.
▷ Sleep mode is ended.
4 Start-up
4.1 Switching on appliance (first use)
Make sure that the following requirements are fulfilled:
❑
The appliance has been installed and connected in
accordance with the installation instructions.
❑
All adhesive strips, adhesive and protective films
and transport locks are removed from inside and on
the appliance.
❑
All marketing leaflets are removed from the drawers.
❑
You are familiar with the functionality of the
Touch & Swipe display. (see 3 Functionality of the
Touch&Swipe display)
Switch on the appliance using the Touch & Swipe
display.
► If the display is in sleep mode: Briefly touch the
display.
► Carry out action steps according to the illustration.
Fig. 5 Example illustration*
▷ Status display appears.
▷ The appliance cools to the temperature set at the
factory.
▷ The appliance starts in demo mode (status display
with DEMO appears): If the appliance starts in demo
mode, you can deactivate demo mode within the
next 5 minutes. (seeDemo mode)
More information:
-
Start the IceMaker for the first time.
(see4.2 Starting the IceMaker for the first time)
-
Start the SmartDevice for the first time.
(see 1.3 SmartDevice) and (seeWiFi)
Note
The manufacturer recommends:
► Store frozen foods at -18°C(-0°F) or colder.
► Observe the notes on storing food. (see 5.1 Informa‐
tion regarding storage)
Note
Accessories can be purchased from the Liebherr
Service Center. The address for your respective country
can be found on the back of the instructions.
4.2 Starting the IceMaker for the first
time
If your appliance is equipped with IceMaker, you must
clean the IceMaker before using it for the first time.
Make sure that the following requirements are fulfilled:
❑
The water supply has been connected. See Installa‐
tion Guide or mounting instructions.
❑
The appliance is properly connected.
► Clean the IceMaker. (see 9.4.5 Cleaning the
IceMaker)
5 Storage
5.1 Information regarding storage
WARNING
Danger of fire
► Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating
performance
► Always keep the air slots unobstructed.
Observe the following specifications for storage:
-
Keep the air vents on the fan free.
-
In the freezer compartment: Package food properly.
-
Package raw meat or fish in clean, closed
containers. This will prevent meat or fish from
touching or dripping onto other food.
-
Keep liquids in closed containers.
-
Leave space between goods to ensure good air
circulation.
-
In the wine compartment: Position storage shelves
according to the height required.
-
In the wine compartment: Observe maximum load
weight. (see 10.1 Technical specifications)
Start-up
* Depending on model and options 9
Bekijk gratis de handleiding van Liebherr SW5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SW5291 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4544 MB |
