Handleiding
Je bekijkt pagina 24 van 36
Message Cause Ending the
message
WLAN error
This message
appears if the appli‐
ance could not be
connected to the
WLAN. (see Estab‐
lishing the WiFi
connection for the
first time)
Carry out
action steps
(see WLAN
error) .
7.3.2 Ending warnings
Door alarm
Fig. 85 Example illustration
► Carry out action steps according to the illustration.
-or-
► Close the door.
▷ Display skips to status display.
You can set how long to door may remain open until
the door alarm sounds. (see Setting the door alarm)
Power failure alarm
Once the power failure has ended, the appliance cools
to the target temperature set earlier.
Fig. 86 Example illustration
► Briefly touch the display.
▷ Display shows information about the warning.
► Briefly touch the display.
▷ The warmest freezing temperature is displayed.
▷ If the freezing temperature was below -9 °C (16 °F):
Food can still be eaten.
If the freezing temperature exceeded -9°C(16°F):
► Check the food.
► Briefly touch the display.
▷ Display skips to status display: The current tempera‐
ture and target temperature are displayed.
Temperature alarm
Causes for the temperature differences may be:
-
You have put in warm, fresh food.
-
Too much warm room air has flowed in during the
rearrangement and removal of food.
-
The power has been out for a longer period of time.
-
The appliance is defective.
► Remedy the cause.
▷ The appliance cools to the target temperature set
earlier:
Fig. 87 Example illustration
► Briefly touch the display.
▷ Display shows information about the warning.
► Briefly touch the display.
▷ The warmest freezing temperature is displayed.
▷ If the freezing temperature was below -9 °C (16 °F):
Food can still be eaten.
If the freezing temperature exceeded -9°C(16°F):
► Check the food.
► Briefly touch the display.
▷ Display skips to status display: The current tempera‐
ture and target temperature are displayed.
Error
Fig. 88 Example illustration
► Briefly touch the display.
▷ Error code is displayed.
► Make a note of the error code.
► Briefly touch the display.
▷ Display skips to status display.
► Contact Customer Service. (see 10.4 Customer
Service)
WLAN error
► Check the WLAN connection.
► Connect the appliance to the WLAN again.
(seeWiFi)
7.3.3 Overview of reminders
The appliance’s behavior in the event of a reminders:
-
Reminder appears in the display in yellow.
Use
24 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SW5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SW5291 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4544 MB |
