Handleiding
Je bekijkt pagina 19 van 36
-or-
► Deactivate with the SmartDevice app.
▷ IceMaker and MaxIce are deactivated.
▷ If ice cubes are currently being made, the system
completes the process.
▷ The IceMaker goes off automatically.
Deactivating MaxIce
► Activate IceMaker. (see Activating IceMaker )
▷ MaxIce is deactivated.
▷ IceMaker is activated.
▷ Deactivating IceMaker and MaxIce: (see Deactivating
IceMaker and MaxIce)
IceMaker water inflow
Set the water inflow with this function. The water
inflow regulates the water inflow volume. You can
adjust the water inflow if it does not match the water
pressure and the size of the ice cubes dispensed.
Upon delivery, the water inflow is set to value 4. You
can select a value of between 1 (smallest inflow
volume) and 8 (largest inflow volume).
Setting the water inflow
Make sure that the following requirements are fulfilled:
❑
IceMaker has been started for the first time.
(see4.2 Starting the IceMaker for the first time)
❑
IceMaker is activated. (see IceMaker / MaxIce )
Fig.53
Fig. 54 Example illustration: Switching from value 5 to
value6.
► Carry out action steps according to the illustration.
▷ Water inflow is set.
TubeClean
This function activates or deactivates TubeClean. Acti‐
vating TubeClean cleans the IceMaker lines.
Activating TubeClean
Make sure that the following requirements are fulfilled:
❑
IceMaker cleaning is prepared. (see 9.4.5 Cleaning
the IceMaker)
❑
Empty container with a capacity of 1.5 l (1.59 qt) and
with a maximum height of 10 cm (3 15/16 in) is
ready.
► Place the container into the drawer below the
IceMaker.
Fig.55
Fig.56
► Carry out action steps according to the illustration.
▷ TubeClean is activated.
▷ Cleaning process has started: Symbol flashes until
the cleaning process is automatically completed
after 60 minutes.
▷ When the cleaning process is completed: Appliance
continues to run in normal operation.
Deactivating TubeClean
TubeClean is automatically completed after
60 minutes. However, you can also deactivate Tube‐
Clean at any time during the cleaning process:
Fig.57
► Carry out action steps according to the illustration.
▷ TubeClean is deactivated: Cleaning process is
canceled.
▷ Appliance continues to run in normal operation.
Display Brightness
Use this function to set the brightness of the display
gradually.
You can set the following brightness levels:
-
40%
-
60%
Use
* Depending on model and options 19
Bekijk gratis de handleiding van Liebherr SW5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SW5291 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4544 MB |
