Liebherr SRTvh 1511 Perfection handleiding

Koelkast

Liebherr

48 pagina's

PDF beschikbaar

Handleiding

6.3 Message

6.3.1 Warnings

Warnings are issued by means of an acoustic signal and

visually via a symbol on the display. The signal gets louder

until the warning is acknowledged.

Message (red) Cause Remedy

Door open

This message appears if the door is open

for too long.

Close the door.

Tap briefly.

Alarm is stopped.

Note

The time until the message appears can be set.

(see6.2.22Door alarm )

Temperature alarm

This message appears if the temperature

does not match the set temperature.

Reasons for differences in temperature

can be:

Warm produce for cooling has been placed

inside.

Too much warm air has got in while you

were sorting out the freezer or removing

items.

The power was cut off for a prolonged

period.

Tap briefly.

Information about errors and appliance status are

displayed.

Tap briefly.

Warmest/coldest temperature, date and time are

displayed.

Tap briefly.

The status screen is displayed.

The current temperature and the alarm symbol

flash red until the set temperature is reached.

Check the quality of the refrigerated goods.

Error

The appliance is faulty, there is an appli‐

ance error or a component of the appliance

has a fault.

Store the cooled produce

elsewhere.

Tap briefly.

The error code (e.g. BT021) is

displayed.

Tap briefly.

A further error code is

displayed if there is one

Status screen is displayed

with flashing error symbol.

Swiping or tapping the display will show the error

code(s) again.

Make a note of error code(s) and contact

Customer Service. (see 9.3 Customer Service)

The message indicates that freeze protec‐

tion mode is active (e.g. due to frequent

door openings or loading with goods).

Tap briefly.

FRZ.PROT is displayed.

Tap briefly.

Status screen is displayed

with flashing error symbol.

Swiping or tapping the display will show the

message again.

The appliance automatically switches to normal

operating mode after a few hours and the

message disappears. Alternatively, the mode and

message can be cancelled with a long tap. If the

message is displayed repeatedly and the causes

listed do not apply, contact customer service.

(see 9.3 Customer Service)

Controls

* Depending on model and options 35

Bekijk gratis de handleiding van Liebherr SRTvh 1511 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.