Handleiding
Je bekijkt pagina 42 van 58

Fig. 181
► Carry out action steps according to the illustration.
▷ Demo mode is activated.
▷ Appliance is switched off.
► Switch on the appliance. (see 4.15 Switching on the
appliance (first use))
▷ “D” appears in the status display.
Deactivating demo mode
Fig. 182
Fig. 183
► Carry out action steps according to the illustration.
▷ Demo mode is deactivated.
▷ Appliance is switched off.
► Switch on the appliance. (see 4.15 Switching on the
appliance (first use))
▷ Appliance is reset to factory settings.
6.2.29 Resetting to factory settings
Use this function to reset all settings to factory
settings. All settings you have made so far are reset to
their original settings.
Performing a reset
Fig. 184
Fig. 185
► Carry out action steps according to the illustration.
▷ Appliance is reset.
▷ Appliance is switched off.
Note
Resetting to factory settings in battery mode: A restart
is only possible with mains voltage.
► Restart the appliance. (see 4.15 Switching on the
appliance (first use))
6.3 Messages
6.3.1 Warnings
Warnings are issued by means of an audio signal and
visually via a symbol on the display. The signal gets
louder until the warning is acknowledged.
Message (red)
Cause Remedy
Door open
The message appears if the door is
open for too long.
Close the door.
Tap briefly.
Alarm is stopped.
Note
The time until the message appears can be
set. (see6.2.23Door alarm )
Use
42 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SRTvh 1501 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Liebherr |
Model | SRTvh 1501 Perfection |
Categorie | Koelkast |
Taal | Nederlands |
Grootte | 7558 MB |