Liebherr SRTvg 1511 Performance handleiding

Koelkast

Liebherr

54 pagina's

PDF beschikbaar

Handleiding

3.2.1 Opening the Settings menu

Fig. 4 Example illustration

Carry out action steps according to the illustration.

Settings menu is open.

If necessary: Navigate to the desired function.

3.2.2 Opening the Advanced menu

Fig.5Access with numerical code 151

Carry out action steps according to the illustration.

Expanded menu is open.

If necessary: Navigate to the desired function.

3.3 Sleep mode

If you do not touch the display for 1 minute, the display

switches to sleep mode. In sleep mode, the display

brightness is dimmed.

3.3.1 Ending sleep mode

Press any navigation key.

Sleep mode is ended.

4 Start-up

4.1 Setup conditions

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a

short circuit.

The appliance is designed for use in enclosed

spaces. Do not operate the appliance in open space

or in damp areas or where there is spray.

4.1.1 Setup location

WARNING

Leaking refrigerant and oil!

Fire. The refrigerant contained within the appliance is

environmentally friendly, but flammable. The oil

contained within the appliance is flammable. Escaping

refrigerant and oil can ignite if they are of high enough

concentration and are exposed to an external heat

source.

Do not damage the pipelines of the coolant circuit

and the compressor.

Do not setup the appliance in direct sunlight, next to

an oven, radiator or similar.

The best place to set up the appliance is a dry and

well ventilated room.

If the appliance is set up in a very humid environ‐

ment, condensation can form on the outside of the

appliance.

Always ensure sufficient airflow and ventilation in

the setup location.

The more refrigerant there is in the appliance, the

larger the space it is installed in must be. If the

space is too small, any leak may create a flammable

mixture of gas and air. For every 8 g (0.28 oz) of

refrigerant, the installation space must be at least

1m

(35.5ft

). Specifications on the refrigerant in the

appliance can be found on the serial tag plate inside

the appliance.

The floor of the setup location must be horizontal

and even.

The setup location must be able to withstand the

weight of the appliance plus the weight when

stocked to maximum capacity. (see 9.1 Technical

data)

Use in hazardous areas is not permitted.

Start-up

8 * Depending on model and options

Bekijk gratis de handleiding van Liebherr SRTvg 1511 Performance, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.