Handleiding
Je bekijkt pagina 8 van 22
Check to see if the next step applies
for your model.
Check the components are in
correctly.
Measure the specified measurement
and adjust if necessary.
Installation tool: Meter stick
Tool for assembly: Cordless screw‐
driver and attachments
Tool for assembly: Spirit level
Tool for assembly: Size 7 and size 10
spanner
Two people are required for this
step.
This step takes place at the selected
location of the appliance.
Aid for assembly: String
Aid for assembly: Square
Aid for assembly: Screwdriver
Aid for assembly: Scissors
Aid for assembly: Non-permanent
marker pen
Accessory kit: Remove components
Dispose of components that are no
longer needed.
13 **** freezer compartment
door*
It is very easy to reposition the hinge of the **** freezer
compartment door if the main door hinge is swapped. If the
main door of the appliance can be opened to more than 115°
(1), you can open the freezer compartment without reposi‐
tioning the hinge. If the opening angle (2) of the appliance
door is less than this, the hinge must be repositioned.
Fig.8
13.1 Moving the door hinge
The slider for moving the door hinge is located on the back
of the **** freezer compartment door at the bottom.
Fig.9
u
Close the **** freezer compartment door (1).
u
Grab the **** freezer compartment door from below.
u
Move the slider (2) either to the right or to the left.
14 Reversing the door
Tool
Fig. 10
**** freezer compartment door*
8 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SIFNdi 5178 Peak, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SIFNdi 5178 Peak |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6262 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Wit |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
