Handleiding
Je bekijkt pagina 3 van 22
service number can be found on the serial
tag:
-
Observe the warning messages and other
detailed information in the other sections
when installing the appliance:
DANGER indicates a hazardous situation,
which if not avoided, will result in
death or serious injury.
WARNING indicates a hazardous situation,
which if not avoided, could result
in death or serious injury.
CAUTION indicates a hazardous situation,
which if not avoided, will result in
minor or moderate injury.
NOTICE indicates a hazardous situation,
which if not avoided, could result
in damage to property.
Note indicates useful advice and tips.
2 Setup conditions
WARNING
Risk of fire due to moisture!
If live parts or the power cord get wet, this can cause a
short circuit.
u
The appliance is designed for use in enclosed spaces. Do
not operate the appliance in open space or in damp areas
or where there is spray.
Normal use
-
Only set up and use the appliance in enclosed spaces.
-
Only use once installed.
2.1 Space
WARNING
Leaking refrigerant and oil!
Fire. The refrigerant contained within the appliance is envi‐
ronmentally friendly, but flammable. The oil contained
within the appliance is flammable. Escaping refrigerant and
oil can ignite if they are of high enough concentration and
are exposed to an external heat source.
u
Do not damage the pipelines of the coolant circuit and
the compressor.
-
If the appliance is installed in a very damp environment
condensate water may form on the outside of the appli‐
ance.
Always ensure sufficient airflow and ventilation in the
setup location.
-
The more refrigerant there is in the appliance, the larger
the space that it is installed in must be. If the space is
too small, any leak may create a flammable mixture of
gas and air. For every 8 g of refrigerant, the installation
space must be at least 1m
3
. Specifications on the refrig‐
erant in the appliance can be found on the serial tag
plate inside the appliance.
2.1.1 Installation surface
-
The floor of the installation site must be horizontal and
level.
-
If you are installing the unit in a cabinet standing on an
uneven floor: level the cabinet.
2.1.2 Installation position
-
Do not install appliance in direct sunlight or next to an
oven, radiator or similar.
-
Only install the appliance in solid cabinets.
Note
A set for restricting the door opening angle to 90° can be
acquired from Customer Services for appliances with soft
closing.*
2.2 Setting up multiple appliances
NOTICE
Risk of damage caused by water condensate!
u
Do not install this device directly beside another fridge/
freezer compartment.
NOTICE
Risk of damage caused by water condensate!
u
Do not stack the appliance directly on top of another.
These appliances are designed for different types of instal‐
lation. Only combine appliances if the appliances are
designed for this. The following table shows the installation
options by model:
Setup type
Model
Single All models
Side-by-Side
(SBS)
Model that start with S....
Stacked Models up to a maximum recess height of
880 mm and with a heated cover can be
“stacked”.
Upper appliance: up to a maximum recess
height of 140mm
Fig.1
Install each appliance into its own recess.
Setup conditions
* Depending on model and options 3
Bekijk gratis de handleiding van Liebherr SIFNdi 5178 Peak, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SIFNdi 5178 Peak |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6262 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Wit |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
